Tetrafluorination of Aromatic Azide Yields a Highly Efficient Staudinger Reaction: Kinetics and Biolabeling

The development of highly efficient bioorthogonal reactions is of paramount importance for the research fields of biomaterials and chemical biology. We found that the o,o′‐difluorinated aromatic azide was able to react with triphenylphosphine to produce water‐stable phosphanimine. To further improve the efficiency of this kind of nonhydrolysis Staudinger reaction, a tetrafluorinated aromatic azide was employed to develop a faster nonhydrolysis Staudinger reaction with a rate of up to 51 m ⁻¹ s⁻¹, as revealed by high‐performance liquid chromatography (HPLC) analysis and fluorescence kinetics. As a proof‐of‐concept study, the highly efficient Staudinger reaction was successfully used for chemoselective fluorescence labeling of proteins and nucleic acids (DNA and RNA) as well as for protein polyethyleneglycol (PEG)ylation. We believe that this bioorthogonal reaction can provide a broadly useful tool for various bioconjugations.     

基于XPS对硫铁矿去除SeO2-3的机理研究

硒是动植物及人体生长必需的十五种微量元素之一，具有清除体内自由基、抗氧化、增强免疫力等功能，但其安全剂量的范围却很窄。利用扫描电子显微镜（SEM）和X射线衍射仪（XRD）对湿法球磨制备的硫铁矿形貌进行了表征。SEM观测发现加乙醇助磨后的硫铁矿为粒径大小较均匀的球形颗粒团聚体，粒径范围在17～200 nm之间，平均粒径138 nm。XRD衍射图谱中的特征峰与FeS₂衍射图谱中各峰位置基本一致，因此判定硫铁矿中主要化学组分为FeS₂，且图谱中基本没有杂峰，表明制备过程中并未混入杂质，样品纯度较高。实验结果表明，该法制备的硫铁矿具有颗粒粒径小、比表面积大、反应活性高等优点。研究中利用X射线光电子能谱仪（XPS）对硫铁矿去除水体中SeO2-₃的机理进行了研究。研究结果表明, （1）在较为广泛的实验pH范围（pH 2.2～11.5），硫铁矿均能有效去除水体中SeO2-₃，去除效率（除pH值7.8以外）均达到90%以上；（2）硫铁矿与SeO2-₃发生反应后，其主要组成元素的XPS特征峰结合能有所减小，表明硫铁矿表面发生了一定化学变化；（3）酸碱环境下硫铁矿去除SeO2-₃的机理不完全相同，酸性环境下，硫铁矿对SeO2-₃的去除是单纯的氧化还原过程，即硫铁矿中被酸活化的S2-₂将SeO2-₃还原为单质Se(0)，并且酸性越强，SeO2-₃去除效果越好；碱性环境下，SeO2-₃的去除过程中氧化还原与络合反应并存，硫铁矿表面有络合态Fe(OH)SeO₃和单质Se(0)两种存在形态，且碱性越强，络合态Fe(OH)SeO₃含量越高。以上研究结果为硫铁矿去除固定水体和土壤中以SeO2-₃为代表的可变价金属阴离子提供重要理论依据和应用基础。     

Mechanism and Stereoselectivity of the Elementometalation Process of Activated Alkyne RCCR(RCO2Me) by Cp2TaH3

The elementometalation process is a fundamental chemical step in several catalytic cycles. In this work, density functional theory computations have elucidated the detailed elementometalation mechanism of activated alkyne RCCR(RCO₂Me) by Cp₂TaH₃ and rationalized the selectivity in experimental findings. The calculated results show that in the formation process of (E)-olefin monohydride((E)-Pro), the Gibbs free energy barrier is low and the entire reaction is spontaneous and exothermic; thus, (E)-Pro can be formed easily. The formation of (Z)-η²-olefin monohydride complex ((Z)-Pro) is difficult due to its high Gibbs free energy barrier. The formation process (E)-Pro consists of the following five steps: hydride H1-shift, conformational isomerism 1, hydride H2-shift, conformational isomerism 2, and olefin coordination process. Topological analysis shows that there is a five-membered ring plane structure in the reaction pathway and that the final product (E)-Pro belongs to a typical η²-olefin monohydride complex. Our calculated results provide an explanation for experimental observations and useful insights for further development of olefin functionalization. © 2019 Wiley Periodicals, Inc.     

S-O bond chemically constrained NiS2/rGO nanocomposite with enhanced Na-ion storage capacity

NiS₂ has become a research hotspot of anode materials for Na-ion batteries due to its high theoretical specific capacity. However, the volume effect, the dissolution of polysulfide intermediates and the low conductivity during the charge/discharge process lead to the low specific capacity and poor cycling stability. NiS₂/rGO nanocomposite was prepared by a facile two-step process: GO was prepared by modified Hummers method, and then NiS₂/rGO nanocomposite was synthesized by l-cys assisted hydrothermal method. NiS₂/rGO nanocomposite shows excellent cycle performance and rate performance, which could be attributed to the mesoporous structure on the graphene skeleton with high conductivity. Besides, the chemical constraint of a unique SO bond on NiS₂ could inhibit the dissolution of intermediates and the loss of irreversible capacity.     

A Shell-by-Shell Approach for Synthesis of Mesoporous Multi-Shelled Hollow MOFs for Catalytic Applications

Over the past two decades, advanced materials with hollow interiors have received significant attention in materials research owing to their great application potential across a vast number of technological fields. Though with great difficulty, multi-shelled hollow metal–organic frameworks (MSHMs) have also been successfully synthesized in recent years. Herein, a rational shell-by-shell soft-templating protocol has been devised to fabricate highly uniform multi-shelled hollow cobalt-imidazole-based MOF (ZIF-67). For the first time, it has become possible to endow mesoporosity to this new type of functional material (i.e., mesoporous MOFs). When used as carrier materials in catalytic reactions, in principle, these mesoporous MSHMs with high surface area not only improve the dispersity of metal nanoparticles (NPs), but also efficiently facilitate the mass diffusion of the reactions, resulting in enhanced catalyst activity. Moreover, the obtained MSHMs/M nanocomposites serve as base-metal bifunctional catalysts for one-pot oxidation-Knoevenagel condensation cascade reaction, in which the MSHMs itself serves as a pristine active catalyst in addition to its role of catalyst support. The results demonstrate that excellent multifunctional catalysts can be achieved via preparing intrinsically microporous bulk MOFs into extrinsically mesoporous MSHMs which possess many structural merits that conventional bulk MOFs do not have.     

Hydroxyl Radical Generation and DNA Nuclease Activity: A Mechanistic Study Based on a Surface‐Immobilized Copper Thioether Clip‐Phen Derivative

Coordination compounds of copper have been invoked as major actors in processes involving the reduction of molecular oxygen, mostly with the generation of radical species the assignment for which has, so far, not been fully addressed. In the present work, we have carried out studies in solution and on surfaces to gain insights into the nature of the radical oxygen species (ROS) generated by a copper(II) coordination compound containing a thioether clip‐phen derivative, 1,3‐bis(1,10‐phenanthrolin‐2‐yloxy)‐N‐(4‐(methylthio)benzylidene)propan‐2‐amine (2CP‐Bz‐SMe), enabling its adsorption/immobilization to gold surfaces. Whereas surface plasmon resonance (SPR) and electrochemistry of the adsorbed complex indicated the formation of a dimeric Cu^I intermediate containing molecular oxygen as a bridging ligand, scanning electrochemical microscopy (SECM) and nuclease assays pointed to the generation of a ROS species. Electron paramagnetic resonance (EPR) data reinforced such conclusions, indicating that radical production was dependent on the amount of oxygen and H₂O₂, thus pointing to a mechanism involving a Fenton‐like reaction that results in the production of OH^..     

Domino Radical Addition/Oxidation Sequence with Photocatalysis: One‐Pot Synthesis of Polysubstituted Furans from α‐Chloro‐Alkyl Ketones and Styrenes

A new domino reaction has been developed that allows the combination of styrenes and α‐alkyl ketone radicals to afford a wide array of polysubstituted furans in good to excellent yields under mild and simple reaction conditions. The key to success of this novel protocol is the use of photocatalyst fac‐Ir(ppy)₃ and oxidant K₂S₂O₈. Mechanistic studies by a radical scavenger and photoluminescence quenching suggest that a radical addition/oxidation pathway is operable.     

Photoredox catalyst-mediated direct regioselective phosphonylation of indoles

An efficient hetero-cross-dehydrogenative-coupling (hetero-CDC) reaction between N-protected indoles and phosphites to 2-indolyphosphites is described. The regioselective methodology took place in the presence of photo redox catalyst Ru(bpy)₃(PF₆)₂ combined with oxygen as an clean oxidant when exposed to visible light, furnishing the 2-indolyphosphites as the exclusive products in moderate to good yields with good functional group tolerance. Moreover, the phosphonylation protocol was proved by the control reaction to proceed through the radical pathway.     

Redox‐Active NOx Ligands in Palladium‐Mediated Processes

This Minireview highlights the redox and non‐innocent behavior of NO_x ligands (x=1, 2, or 3) in selected Pd‐mediated processes, for example, alkene and aromatic oxidation processes. A focus is placed on mechanistic understanding and linking recent transformations, such as C? H bond activation/functionalization and Wacker oxidation, with previous work on the functionalization of aromatics and alkenes by Pd^II salts.